17 EN
• Press the FRONT key each time to select Front L or Front R
channel.
• Press the CENTER or SW key to select center or subwoofer
channel.
• Press the REAR key to select surround channel.
And use the REAR key for the following displays.
1 LS : Surround L channel.
2 BS : Back surround channel.
3 RS : Surround R channel.
4Press the SET UP key again.
•The test tone is turned off and return to the main setup displays.
6 Input the distance to the speakers.
1Measure the distance from the listening position to each of
the speakers.
Jot down the distance to each of the speakers.
Distance to Front left speaker (L) : ____ meters
Distance to Center speaker (C) : ____ meters
Distance to Front right speaker (R) : ____ meters
Distance to Surround right (RS) :____ meters
Distance to Back Surround (BS) : ____ meters
Distance to Surround left (LS) : ____ meters
Distance to Subwoofer (SW) : ____ meters
2Press theTRIM%/fi keys to select the “DISTANCE” on setup
displays and press the SETUP key again.
3Use the SET UP key to select the speakers and the TRIM%/fi
keys to adjust the distance to the front speakers.
The speaker indicator to be adjusted blinks.
•The allowable setting range is 0.3 to 9.0 m, adjustable in 0.3 m
increments.
4Repeat steps 3 to input the distance for each of the speakers.
5Press the SET UP key again to return to main setup displays.
•The speakers you have selected should appear on the display.
Confirm that all the speakers have been correctly selected.
Preparing for surround sound
MUTEDOLBY DEX NEO:6 DSP TS DIGITAL ST.
AUTO
L
LFE SW
CR
DOLBY PLII
DTS -ES AAC
DISCRETE
MATRIX 6.1
ACTIVE EQ.
LS S BS RS
03.8.24, 10:55 PM17