26 EN
The remote control supplied with this amplifier is also
capable of controlling components from a variety of
manufacturers once you register the appropriate setup codes
into the remote control unit.
Low battery warning
Replace all two batteries with new ones when you notice a shortening
of the distance from which the remote control will operate. The
remote control is designed to retain setup codes in memory while you
change batteries.

Registering setup codes for other components

Refer to below list about the components which can be
registered to INPUT SELECTOR keys of the remote control.
You can register to the ‡ marked INPUT SELECTOR keys of
the remote control.
VIDEO ‡
TV ‡
Satellite ‡
Cable ‡
DVD player ‡
CD player ‡
1Find the setup code of the component to be registered.
•Refer to the setup code lists to find the setup code for the
component to be registered. •
Example: To register a DVD made by KENWOOD, you would enter
“005”.
Input Component Maker Code Key
(DVD) DVD player KENWOOD 005 DVD/CD
2Registering components for the remote control.
1During press and hold the ENTER key, press one of the INPUT
SELECTOR key or TV key which you want to register.
• LED will blink twice as confirmation.
2Press the Numeric keys to enter the three-digit setup code.
• LED will blink once as confirmation.
Basic remote control operations for other components
Checking the codes .
If you want to know which number was set.
1After registering the setup code, press and hold the ENTER
key and then press the INPUT SELECTOR key.
• LED will blink twice as confirmation.
2Press the ON SCREEN key.
•LED will blink according to first, second and third digit for the current
setup code.
•In case of digit 0, the LED will blink ten times.
Example : If the registered SETUP code is “028”, the LED will blink
ten times, two times and eight times.
•If the ON SCREEN key is not pressed within ten second, this
function will be cancelled.
Note
Although each setup code is designed to work with a number of
different models, certain codes may not work with some models.
(Also, certain codes may only operate some of the functions available
on a given model.)
If no response after registering setup codes.
1During press and hold the ENTER key, press any of the INPUT
SELECTOR keys or TV key which you want to register.
• LED will blink twice as confirmation.
2Press the 5 key until the component you want to control turns
on.
3Press the ENTER key.
• If you press the 5 key after turn on the component you want to
control, press ∞ key to return to previous step.
3Press the registered INPUT SELECTOR key and then press the
SOURCE key to check that the component you want to
control turns on or press the TV key to check that the TV
turns on.
If the component does not react, and there is more than one
setup code, enter another setup code and try again.
•If the component is already on, pressing the SOURCE key will
turn it off.
4Repeat steps 2 to 3 to register additional components until
POWERTV5¥∞¥2¥3ON SCREENSOURCEENTERINPUT SELECTORNumeric keys
INPUT SELECTOR
keys DVD/CD VIDEO1 VIDEO2 TV
03.8.24, 11:00 PM26