Installation

1.Select a location to mount the KCA-20FM. Ensure that the wires do not become entangled in the driver’s or passenger’s feet.

2.Use double-stick tape or screws to attach the KCA-20FM to the mounting surface.

Note: If using screws, make sure that they do not damage wiring or other systems on the other side of the mounting surface.

3.Connect the wires according to the diagram on the facing page.

•Connect the supplied toggle switch on the +12V (red) line, between the fuse and the vehicle’s battery.

•Mount the toggle switch in a location that is easily accessible to the driver

4.Use an audio cable to connect the KCA-20FM to the connected source’s left and right audio outputs

Adjusting the output level

If there is noticeable distortion when listening to the connected source component, reduce the KCA-20FM’s output level by rotating the Level Adjustment Wheel that is visible on the side of the unit.

Adjusting the Output Level

KCA-20FM Connections

2

KCA-20FM Instruction Manual

KCA-20FM Instruction Manual

3