Stage 3 adjusted manual, please refer to last page for switch position.
Setting the FM |
|
transmission frequency |
|
| 1. Select a frequency from those listed on the diagram |
|
| on the right that has no station broadcasting on it in |
|
| your area |
|
| 2. Use a small screwdriver to set the dip switches on |
|
| the side of the unit to the desired frequency |
|
| Note: Some radios may not be able to receive 87.7MHz |
|
Using the |
|
| • Use the toggle switch to select between the connect- |
|
| ed source and the vehicle’s radio. |
|
| • To listen to the connected source, set the vehicle’s |
|
| radio to the frequency selected above. | Setting the FM Transmission Frequency |
If this unit fails to operate properly, contact your dealer, or call
4 |