Sirius Satellite Radio tuner features
Listening to Radio Stations
Select the Sirius mode:Press the [SRC] button until the display reads “SIRIUS”Selecting a Category:Press the [SRCH (>/ll)] buttonPress the [ | ] button to move to the next category |
Press the [ | ] button to move to the previous category |
Press the [SEEK] button so the display shows “SEEK 1” Press and hold the [SEEK] button for at least one second
Release the [SEEK] button when you hear the channel you want to listen toSelecting a Channel Directly (using the remote):You can use the remote to select a channel directly by number
Press the [DIRECT] button on the remoteUse the remote’s number buttons to enter the channel number Press the [l<<] or [>>l] button to receive the channel
• You can select up to Channel number 223• If you don’t press a button for 10 seconds, the Direct Access mode is automatically cancelled
Using Station Presets with Sirius Satellite Radio
Select the Preset Band:Press the [ ] button. The Preset Band cycles betweenSR1/SR2/SR3/SR4 with each press of the button.Entering a Channel in memory:Press the [ ] button to select the desired Preset Band Select the Channel you want to put into memory (see above)
Press and hold a preset [#1] – [#6] button for at least 2 seconds to memorize the station in that position
• The preset number display will blink onceSelecting a Preset Channel:Press the [ ] button to select the desired Preset BandPress the desired preset button [#1] – [#6]Scanning Preset ChannelsPress the [SEEK] button so the display shows “SEEK 2”Press the [>>l] button to skip to the next presetPress the [l<<] button to skip to the previous presetViewing Information on the Display
Press the [DISP] button repeatedly to cycle through the following information:CHANNEL (name of the current channel) SONG (name of the