Channel Preset Memory

Putting the channel in the memory.

1Select the preset band Press the [u] button.

2Select the channel to put in the memory Press the [4] or [¢] button.

3Put the channel in the memory

Press the [#1] — [#6] button for at least 2 seconds. The preset number display blinks 1 time.

On each band, 1 channel can be put in the memory on each [#1]

— [#6] button.

Only the channel number is stored. Category information is not stored.

Preset Tuning

Calling up the channels in the memory.

1Select the preset band Press the [u] button.

2Call up the channel

Press the [#1] — [#6] button.

Channel Scan

Scanning for the channel you want to listen to.

1Start Channel Scan

2Release it when the channel you want to listen to is received Press the [SEEK] button for at least 1 second.

Channel Search

You can switch from Up/Down of Channel in a category being selected to Previous/Next of Category that includes Channel being received and vice versa.

1Enter Channel Search mode Press the [SRCH] button.

2Select the Category

Press the [u] or [d] button.

3Select the Channel

Press the [4] or [¢] button.

Canceling Channel Search

Press the [SRCH] button.

You cannot operate this unit until all the Category information is acquired.

Press the [SEEK] button for at least 1 second. "SCAN" indicator is ON.

— 7 —