Kenwood KDC-1032, KDC-132, KDC-132CR System Q, Audio Control, Audio Setup, Range, Range, Display, Display, Display, Sound setting, 5Exit Audio Setup mode, 2Enter Audio Setup mode

General features

System Q

Selecting the best sound setting preset for different types of music.

1Select the source to set Press the [SRC] button.

2Select the Sound type Press the [Q] button.

When you press the button once, the current sound setting is displayed.

Each time you press the button, the sound setting alternates.

Sound setting	Display
Flat	"FLAT"
Rock	"ROCK"
Pops	"POPS"
Easy	"EASY"
Top 40	"TP40"
Jazz	"JAZZ"

•"USER": The values set on the <Audio Control> (page 8). When the System Q setting is changed, the Bass, Middle, and Treble set in audio control replace the System Q values.

•Change each setting value with the <Speaker Setting> (page 9).

First, select the speaker type with the Speaker setting.

Audio Control

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [VOL] knob.3Select the Audio item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

8 English

4Adjust the Audio item Turn the [VOL] knob.

Adjustment Item	Display	Range
Bass level	"BAS"	–8 — +8
Middle level	"MID"	–8 — +8
Treble level	"TRE"	–8 — +8
Balance	"BL"	Left 15 — Right 15
Fader	"FD"	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

5Exit Audio Control mode Press any button.

Press a button other than the [VOL] knob, [SRC], [0] and [ATT] button.

Audio Setup

Setting the Sound system, such as Volume offset and Loudness.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [VOL] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [VOL] knob.

Each time you press the knob, the item to be adjusted alternates between the items shown in the table below.

4Adjust the Audio setup item Turn the [VOL] knob.

Adjustment Item	Display	Range
Volume offset	"V-OF"	–8 — ±0
Loudness	"LOUD"	ON/OFF

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones during low volume.

When Loudness is ON, "LOUD" indicator is ON.

5Exit Audio Setup mode

Press the [VOL] knob for at least 1 second.