Kenwood KDC-1032, KDC-132, KDC-132CR Speaker Setting, Clock Display, Adjusting Clock, Display, Speaker type, Enter Standby, 1Enter Standby, 1Enter Standby, 4Adjust the hours, Adjust the minutes

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button. Select the "STBY" display.

2Enter Speaker Setting mode Press the [VOL] knob.

3Select the Speaker type Turn the [VOL] knob.

Each time you turn the knob, the setting alternates between the settings shown in the table below.

Speaker type		Display
OFF		"SP-F"
For 5	& 4 in. speaker	"SP-5"
For 6	& 6x9 in. speaker	"SP-6"
For the OEM speaker		"SP-O"

4Exit Speaker Setting mode Press the [VOL] knob.

Clock Display

Press the [CLK] button.

Each time you press the button, the clock display turns ON and OFF.

Adjusting Clock

1Enter Standby

Press the [SRC] button. Select the "STBY" display.

2Select the clock display Press the [CLK] button.

3Enter clock adjustment modePress the [CLK] button for at least 2 seconds. The clock display blinks.4Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutesPush the Control knob towards [4] or [¢].

5Exit clock adjustment mode Press the [CLK] button.

English 9