Connecting Wires to Terminals
| Fuse (10A) |
English | FUSE 10A |
If no connections are made, do not let the wire come out from the tab. | Wiring harness |
| (Accessory1) |
Rear left output (White)
REAR
L
R 
FM/AM antenna input Rear right output (Red)
Connect either to the power control terminal when using the optional power amplifier, or to the antenna control terminal in the vehicle.
P.CONT.OUT | Power control/Motor antenna |
| |
ANT. | control wire (Blue/White) |
CONT. |
|
White/Black | – | To front left |
| ||
|
| |
FRONT • L | + | speaker |
| ||
White |
|
|
Gray/Black | – | To front right |
| ||
|
| |
FRONT • R | + | speaker |
Gray |
|
|
Green/Black | – | To rear left |
| ||
|
| |
REAR • L | + | speaker |
Green |
|
|
Ignition key switch
Car fuse box (Main fuse)
ACC
Car fuse box
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
Purple/Black | – |
|
| To rear right | |
|
| |
REAR • R | + | speaker |
Purple |
|
|
+ | – |
|
2CAUTION
Battery
2WARNING
If you connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. Always connect those wires to the power source running through the fuse box.
When only two speakers are being connected to the system, connect the connectors either to both the front output terminals or to both the rear output terminals (do not mix front and rear). For example, if you connect the + connector of the left speaker to a front output terminal, do not connect the - connector to a rear output terminal.
