Kenwood KDC-135, KDC-135CR Display, Setting, Display, Setting, Display, Setting, Display, Setting, Switching preout, 3Adjust the hours, Adjust the minutes, Manual Clock Adjustment

In Standby mode

Manual Clock Adjustment1Select Clock Adjustment modePush the Control knob towards [FM] or [AM]. Select the "CLCK" display.2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the hoursPush the Control knob towards [FM] or [AM].Adjust the minutes

Push the Control knob towards [4] or [¢].

4Exit Clock adjustment mode Press the [MENU] button.

In Standby mode

DSI (Disabled System Indicator)

A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.

Display	Setting
"On DSI"	LED flashes.
"OFF DSI"	LED OFF.

Function of KDC-135

In Standby mode

Switching preout

Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)

Display	Setting
"REAR"	Rear preout.
"SUB"	Subwoofer preout.

In FM reception

CRSC (Clean Reception System Circuit)

Temporarily have reception alternate from stereo to mono to reduce multi-path noise when listening to the FM station.

Display	Setting
"On CRSC"	The CRSC is ON.
"OFF CRSC"	The CRSC is OFF.

⁄

•Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF.

In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.

Display	Setting
"OFF AUH"	When selecting the source there’s no Auxiliary Input.
"On AUH"	When selecting the source there’s Auxiliary Input.

English 13