Contents
Page
Safety precautions
Notes
About CDs
General features
Tuner features
To prevent injury or fire, take the following precautions:
To prevent damage to the machine, take the following precautions:
Do Not Load 3-in.CDs in the CD slot
Lens Fogging
Cleaning the Unit
Cleaning the Faceplate Terminals
The marking of products using lasers (Except for some areas)
Handling CDs
When using a new CD
CD accessories
CD cleaning
Removing CDs
Power
Turning ON the Power
Press the [SRC] button
Turning OFF the Power
Press the [SRC] button for at least 1 second
System Q
2Select the Sound type Press the [Q] button
Sound setting
Display
Audio Control
Audio Setup
2Enter Audio Setup mode
Press the [VOL] knob for at least 1 second
3Select the Audio Setup item to adjust Press the [VOL] knob
4Adjust the Audio setup item Turn the [VOL] knob
Clock Display
Press the [CLK] button
Adjusting Clock
3Enter clock adjustment mode
Press the [CLK] button for at least 2 seconds. The clock display blinks
Tuning
2Select the band
3Tune up or down band
Tuning Mode
Press the Control knob
Station Preset Memory
1Select the band
Select the frequency to put in the memory Push the Control knob towards
3Put the frequency in the memory
Press the desired [1] — [6] button for at least 2 seconds
Playing CD
Fast Forwarding and Reversing
When a disc is inserted
Fast Forwarding
Hold down toward [¢] with the Control
Track Search
Track Repeat
Press the [REP] button
Scan Play
1Start Scan Play
Accessories
Installation Procedure
Page
Connector Function Guide
2WARNING
Connecting the ISO Connector
Page
Removing the hard rubber frame
General
Tuner source
Disc source
The messages shown below display your systems condition
FM tuner section
MW tuner section
LW tuner section
CD player section
Audio section
