Manuals / Brands / Car Audio and Video / Car Stereo System / Kenwood / Car Audio and Video / Car Stereo System

Kenwood KDC-234SG Power, Volume, Attenuator, Source required, Increasing Volume, Decreasing Volume, Turning ON the Power, Selecting the Source, Turning OFF the Power

1 22

Download 22 pages, 843.41 Kb

General features

Release button	VOL	Control knob
	VOL

ATT	Q	SRC	CLK

			LOUD indicator

Clock display

ATT indicator

PowerTurning ON the PowerPress the [SRC] button.Turning OFF the PowerPress the [SRC] button for at least 1 second.Selecting the Source

Press the [SRC] button.

Source required	Display
Tuner	"TUnE"
CD	"CD"
Standby (Illumination only mode)	"STBY"

VolumeIncreasing VolumeTurn the [VOL] knob clockwise.Decreasing VolumeTurn the [VOL] knob counterclockwise.Attenuator

Turning the volume down quickly.

Press the [ATT] button.

Each time you press the button, the Attenuator turns ON and OFF.

When the Attenuator is ON, the "ATT" indicator blinks.

6 English

Contents

Page Safety precautions Notes About CDs General features Tuner features To prevent injury or fire, take the following precautions: To prevent damage to the machine, take the following precautions: Do Not Load 3-in.CDs in the CD slot Lens Fogging Cleaning the Unit Cleaning the Faceplate Terminals The marking of products using lasers (Except for some areas) Handling CDs When using a new CD CD accessories CD cleaning Removing CDs Power Turning ON the Power Press the [SRC] button Turning OFF the Power Press the [SRC] button for at least 1 second System Q 2Select the Sound type Press the [Q] button Sound setting Display Audio Control Audio Setup 2Enter Audio Setup mode Press the [VOL] knob for at least 1 second 3Select the Audio Setup item to adjust Press the [VOL] knob 4Adjust the Audio setup item Turn the [VOL] knob Clock Display Press the [CLK] button Adjusting Clock 3Enter clock adjustment mode Press the [CLK] button for at least 2 seconds. The clock display blinks Tuning 2Select the band 3Tune up or down band Tuning Mode Press the Control knob Station Preset Memory 1Select the band Select the frequency to put in the memory Push the Control knob towards 3Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds Playing CD Fast Forwarding and Reversing When a disc is inserted Fast Forwarding Hold down toward [¢] with the Control Track Search Track Repeat Press the [REP] button Scan Play 1Start Scan Play Accessories Installation Procedure Page Connector Function Guide 2WARNING Connecting the ISO Connector Page Removing the hard rubber frame General Tuner source Disc source The messages shown below display your systems condition FM tuner section MW tuner section LW tuner section CD player section Audio section