Item

Selectable setting (Preset: *)

SWITCH PRE

REAR*/ SUB-W: Selects whether rear speakers or a subwoofer are connected to the line out terminals on the

 

rear of the unit (through an external amplifier).

SP SELECT

OFF*/ 5/4/ 6 × 9/6/ OEM: Selects the speaker size for optimum performance.

F/W UP xx.xx

YES: Starts upgrading the firmware. ; NO*: Cancels (upgrading is not activated).

 

For details on how to update the firmware, see: www.kenwood.com/cs/ce/

Listening to the radio

Hold for about 2 seconds to memorize the current station.

Press briefly to recall memorized station.

1Press SRC to select “TUNER.”

2Press BAND repeatedly to select a band (FM1/ FM2/ FM3/ AM).

3 Press 4 / ¢ to search for a station.

Adjust [SETTINGS] mode settings

While listening to the radio...

1Press the volume knob to enter [FUNCTION] mode.

2Turn the volume knob to select [SETTINGS], then press to enter.

3 Turn the volume knob to make a selection, then press to confirm. See table below for selection.

4 Hold to finish the procedure.

Item

Selectable setting (Preset: *)

SEEK MODE

Selects the tuning mode for 4 / ¢ buttons.

 

AUTO1*: Automatically search for a station. ; AUTO2: Search in the order of the stations in the preset

 

memory. ; MANUAL: Manually search for a station.

AUTO MEMORY

YES: Automatically starts memorizing 6 stations with good reception. ; NO*: Cancels (automatic

 

memorizing is not activated). (Selectable only if [NORM] is selected for [PRESET TYPE].) (page 6)

MONO SET

ON: Improve the FM reception (but the stereo effect may be lost). ; OFF*: Cancels (stereo effect resumes).

Using the remote controller (RC-405)
FM+ / AM–

: Selects band.

4 / ¢ (+) : Selects station.

1 – 6

: Selects preset station.

ENGLISH

7