Switch the frequency step used in seeks. The factory defaults
are 50 kHz for FM and 9 kHz for AM.
Turn the power off.
Hold down buttons #1 and #5, then turn the power back on.
The frequency step settings will be changed to 200 kHz for FM
and 10 kHz for AM.
2
1
Frequency Step Setting
You can automatically store all the receivable frequencies in
the band currently being listened to, and then recall them with
the touch of a button later. This function is especially useful
when you are travelling and do not know what stations are
available. Up to six frequencies can be stored this way.
Select the band for auto memory entry.
Press the AME button for at least two seconds to start auto
memory entry.
The numbers of the preset station buttons are shown in order.
When all the stations in a certain band are stored in the preset
memory, the auto memory entry stops. The tuner then plays
the last station received.
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
2
1
Auto Memory Entry
Recalling a Preset Station:
Press the preset station button (#1-6) for the desired station.
The number of the recalled station is displayed.
You can store six stations in each of the FM1, FM2, FM3, and AM
bands.
NOTE
Store the frequency of a station. You can then recall that
station with a single touch of a button.
Select the band/ station that you want to have stored.
Press the button (#1-6) that you want to use for the station, for
at least two seconds.
The button number blinks once in the display to indicate that
the data has been stored.
2
1
Station Preset Memory
You can choose between auto seek tuning of receivable
frequencies and manual tuning.
Press the SRC (source) button repeatedly to select the tuner
mode. "TUnE" is displayed when the tuner mode has been
selected.
Press either the FM or AM button to select the band.
Each time you press the FM button, the band switches
between FM1, FM2, and FM3 (which are used for groups of
preset stations).
Press the AM button to select the AM band.
Press the AUTO button to switch between auto seek tuning
and manual tuning.
The AUTO indicator lights up only when auto seek tuning is
selected.
•Auto Seek Tuning
Press the ¢button to seek higher frequencies.
Press the 4button to seek lower frequencies.
•Manual Tuning
Press the ¢button to increase the frequency by one step.
Press the 4button to decrease the frequency by one step.
The ST indicator lights up when stereo broadcasts are being
received.
NOTE
4
3
2
1
Tuning
Tuner features
— 10 —
English
KDC-4016_U.Sr2 02.5.15 10:16 AM Page 10