Kenwood KDC-4016 - page 20

English

— 20 —

Installation

Removing the hard rubber frame

■

When the lower level is removed, remove the upper two

locations.

2

The frame can be removed from the top side in the same

manner.

NOTE

Catch

Lock

Engage the catch pins on the removal tool and remove the two

locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

1

Accessory3

Removal tool

Accessory4

Removing the Unit

■

Lower the removal tool

toward the bottom, and pull

out the unit halfway whilst

pressing towards the

inside.

4

Pull the unit all the way out

with your hands, being

careful not to drop it.

5

Be careful to avoid injury from the catch pins on the removal

tool.

2CAUTION

Catch facing up

Refer to the section “Removing the hard rubber frame (P. 20)”

and then remove the hard rubber frame.

Remove the Hex-head screw with integral washer (M4×8) on

the back panel.

Insert the two removal tools deeply into the slots on each side,

as shown.

3

2

1

Accessory3

Removal tool

KDC-4016_U.Sr2 02.5.15 10:16 AM Page 20

Contents

Main Contents Safety precautions To prevent injury or fire, take the following precautions: 2WARNING To prevent damage to the machine, take the following precautions: 2CAUTION IMPORTANT INFORMATION CLASS 1 LASER PRODUCT Safety precautions Cleaning the CD Slot Lens Fogging Handling Compact discs Switching Modes Power General features 4 Audio Control Setting Volume Attenuator Loudness Page Page Tuner features Clean Reception System Circuit (CRSC) Track Search Playing CDs Fast Forwarding and Reversing Disc Play Playing Other Disc mode Track Scan Track / Disc Repeat Disc Search (Function of disc changers) Magazine Random Play (Function of disc changers) Disc Scan (Function of disc changers) Random Play Basic Operations of remote -+ FM/DISC + ATT AM/DISC TUNE +//TRACK + 38 + Basic Operations of remote Page Connecting Wires to Terminals KDC-4016_U.Sr2 02.5.15 10:16 AM Page 18 If no connections are made, do not let the wire come out from the tab. Installation Installing in Japanese-Made Cars Installation Page Page KDC-4016_U.Sr2 02.5.15 10:16 AM Page 22 Troubleshooting Guide SOLUTIONPOSSIBLE CAUSEPROBLEM External disc control mode (KDC-4016 only) KDC-4016_U.Sr2 02.5.15 10:16 AM Page 23 SOLUTIONPOSSIBLE CAUSEPROBLEM If the following situations, consult your nearest service center: