Tuner features (See page 6)

Selecting Tuning Mode

You can choose from three tuning modes: auto seek, preset station seek, and manual. The “Auto1” indicator lights up when auto seek tuning is selected, and the “Auto2” indicator lights when preset station seek tuning is selected.

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the tuning function appears in the display.

Press the 4 button to search in the other direction.

The tuning method is displayed as “AUTO1,” “AUTO2,” or “MANUAL,” referring respectively to auto seek tuning, preset station seek tuning, and manual tuning.

3Switching settingsPress either the AM button or FM button to switch the tuning mode.The display and setting will change.4Press the MENU button to end the menu mode.Tuning1Press the TUN button to turn the radio on.

2Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3.

Press the AM button to select the MW and LW bands.3• Auto Seek Tuning

Press the ¢ button to seek increasing frequencies. Press the 4 button to seek decreasing frequencies.

•Preset station seek tuning

Press the ¢ button to move to the next preset station (i.e., the one with the next highest number), and the 4 button to move to the last preset station (i.e., the one with the next lowest number).

NOTE

If the frequencies stored at the preset numbers receive stations which were not originally memorized when traveling long distances, the preset number is not displayed. In such cases, pressing the 4/¢ button to use preset station seek will receive channel 1.

•Manual Tuning

Press the ¢ button to increase the frequency by one step. Press the 4 button to decrease the frequency by one step.

NOTE

The ST indicator lights up when stereo broadcasts are being received.Local Seek Function

With the local seek function turned on, auto seek tuning skips stations with relatively poor reception.

Turning Local Seek Function On/Off:

1Hold down the MENU button for one second or more. "MENU" is displayed and the menu mode is turned on.

2Press the ¢ button repeatedly until the local seek function appears in the display.

Press the 4 button to search in the other direction.

The function setting is indicated by "LO.S ON" or "LO.S OFF" in the display, indicating that the local seek function is on or off, respectively.

3Switching settings

Press either the AM button or FM button. The display and setting will change.When local seek function is on, the LO.S indicator is turned on.

4Press the MENU button to end the menu mode.

— 11 —