Clock and Other Functions
Initial Settings
You can select following Initial Setting items.
1Select the Standby
Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select the “STANDBY” display.
✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
2Enter Menu List mode Press the [MENU] button.
3Enter Initial Setting mode
Turn the [VOL] knob and press it when the desired item is displayed.
Select “Initial Settings”.
4Select the setting item to adjust Turn the [VOL] knob.
Display | Overview | |
“Initial Settings” |
| |
| “SRC Select” | Sets the source selection method. |
|
| “1”/ “2” |
| “Beep” | Setting the operation check sound (beep sound) |
|
| ON/OFF. |
|
| “OFF”/ “ON” |
| “Russian” | When this is set to ON, the following character |
|
| strings are displayed in Russian: |
|
| Folder name/ File name/ Song title/ Artist |
|
| name/ Album name/ |
|
| accessory) |
|
| “OFF”/ “ON” |
| “Menu Language” | You can select the display language for the |
|
| Menu list item. |
|
| “English”/ “French”/ ”Spanish”/ “German”/ |
|
| “Italian”/ “Russian” |
| “Power OFF Wait” | Setting the timer to turn this unit’s power OFF |
|
| automatically when Standby mode continues. |
|
| Using this setting can save the vehicle’s battery |
|
| power. |
|
| |
|
| “20min”/ “40min”/ “60min”: Turns the power |
|
| OFF after minutes. |
| “Built in AUX” | When this is set to ON, AUX source can be |
|
| selected. |
|
| “ON”: Allows AUX source to be selected. Use |
|
| this setting when the |
|
| is connected to the external equipment all |
|
| the time. |
|
| “OFF”: Disable AUX source selection. Use this |
|
| setting when the |
|
| not used. |
| “Forced | Sets the CD read mode. |
|
| “1”/ “2” |
34
| “Favorite Delete” | Deletes Favorite Preset Memory. | ||
|
| Refer to <Favorite Preset Memory Delete> | ||
|
| (page 44). |
|
|
| “Built in AMP” | Selecting “OFF” turns off the | ||
|
| Turning off the | ||
|
| quality of the sound from Preout. | ||
|
| “OFF”/ “ON” |
|
|
| “DSI” | DSI (Disabled System Indicator) of the unit blinks | ||
|
| when the faceplate is removed. | ||
|
| “OFF”/ “ON” |
|
|
|
| ( |
| : Factory setting) |
5Make a setting
•When the “ PUSH ” icon is displayed (at the right edge of the display)
Turn the [VOL] knob to select a setting value, and then press the [VOL] knob.
•When the “ PUSH ” icon is not displayed Press the [4] or [¢] button to select a setting value.
6Exit Menu List mode
Press the [MENU] button for at least 1 second, and then press it again briefly.