![](/images/backgrounds/218385/218385-7239x1.png)
Dual Zone System
Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.
Display | Overview |
|
| |
“2Zone Rear Volume”*1 | Adjust the volume of Rear channel. | |||
|
| “0” — “35” |
|
|
“Detailed Setup” |
|
|
| |
| “2Zone” | Sets the Dual Zone System. | ||
|
| “OFF”/ “ON” |
|
|
| “2Zone Select”*1 | Specifies the destination of sub source sound | ||
|
| when the Dual Zone function is turned on. | ||
|
| “Rear”/ “Front” |
|
|
*1 The Dual Zone System is set to “ON”. |
|
| ||
|
| ( |
| : Factory setting) |
1Select the source
Press the [SRC] button. Turn the [VOL] knob and press it when the desired item is displayed. Select a source other than “STANDBY”.
✍✍SRC Select mode 2: Pressing the [SRC] button repeatedly switches source.
2Enter Audio Control mode Press the [VOL] knob.
3Turn the [VOL] knob and press it when the desired item is displayed.
Select “Detailed Setup”.
4Select the item you want to set
Turn the [VOL] knob and press it when the desired item is displayed.
5Exit Audio Control mode
Press the [MENU] button for at least 1 second, and then press it again briefly.
⁄
•Select Main source by [SRC] button.
•Adjust the volume of Front channel by [VOL] knob.
•The Audio Control has no effect on sub source.
•There are following limitations when Dual Zone System is enabled.
-There is no output from the subwoofer.
-“Fader”, “Subwoofer Level” of <Audio Control> (page 36) and DSP function are not available.
•The Bluetooth audio source can be set exclusively to the front speaker. Set “2Zone Select” to “Rear”.
English 39