Function of remote control with DNPP button (See page 8)

Preset station seek with Programme service name

You can search for the preset station with Programme Service name.

1Press the DNPP button on the remote control.

“SNP PLAY” will be displayed once the seek mode is entered. The names of the stations preset in the band currently listened to are displayed for 5 seconds each.

The display band switches in the following order:

=FM1 ï FM2 ï FM3 ï AM +

Each time you press the ¢ button, the station display switches in the forward direction.

Each time you press the 4 button, the station display switches in the reverse direction.

Stations which have no names will be displayed as frequencies.

NOTE Changing the Displayed Band

Pressing the FM button switches between the FM1, FM2, FM3 and AM displays, in that order.

Pressing the AM button switches between the displays in the reverse direction.

2Once the name is displayed for the station you want to listen to

Press the OK button.

Reception starts of the displayed station, and the seek mode ends.

Cancelling mode during input:

Press the DNPP button.

The seek mode is cancelled.

Switching Display for Tuner (non-RDS station)

Switching the Display:

Each time you press the DISP button, the display switches between the frequency and Clock.

NOTE

•When the switching clock display (P.32) is set to off, the display will not switch to the clock display.

•The £ indicator lights whilst the clock is displayed.

— 15 —