1Select the band/ station that you want to have stored.

2Hold down the button (#1-6) that you want to use for the station, for two seconds or more.

The button number blinks once in the display to indicate that the data has been stored.

Recalling a Preset Station:

Press the preset station button (#1-6) for the desired station. The number of the recalled station is displayed.

NOTE

You can store 6 stations in each of the FM1, FM2, FM3, and AM (MW and LW) bands.

Preset station seek with Programme service
name

(Function of Remote Control)

You can search for the preset station with Programme Service name.

1Press the DNPP button on the remote control.

"SNPP" will be displayed once the seek mode is entered.

The names of the stations preset in the band currently listened to are displayed for 5 seconds each.

The display band switches in the following order:

= FM1 ÔFM2 ÔFM3 ÔAM +

Each time you press the ¢ button, the station display switches in the forward direction.

Each time you press the 4 button, the station display switches in the reverse direction.

Stations which have no names will be displayed as frequencies.

NOTE Changing the Displayed Band

Pressing the FM button switches between the FM1, FM2, FM3 and AM displays, in that order.

Pressing the AM button switches between the displays in the reverse direction.

2Once the name is displayed for the station you want to listen to

Press the OK button.

Reception starts of the displayed station, and the seek mode ends.

Cancelling mode during input:

Press the DNPP button.

The seek mode is cancelled.

— 15 —