You can dim the display.
NOTE
The dimmer function is not available for units if the dimmer cable is not connected.
Display and setting:
"Dimmer ON" : The dimmer setting is on.
"Dimmer OFF" : The dimmer setting is off.
the faceplate can be removed from the faceplate bracket.
Display and setting:
"OFF WAIT" : 0s / 3s / 5s / 10s / 15s / 20s / 25s (s=sec.)
NOTE
If you do not slide the faceplate lock switch during the period which you have set, the unit’s power turns off after the control panel is automatically hidden.
You can turn the movement of graphic display on and off. The initial setting is ON.
Display and setting:
"Graphic ON" : The graphic display works.
"Graphic OFF" : The graphic display does not work.
When this system is set to on, the sound coordinate factors (Bass frequency, Bass quality, Bass extension, and Treble frequency) appear during the audio control mode.
Display and setting:
"Kex/ec4/dB set ON" : The sound coordinate factors appear and can be adjusted.
"Kex/ec4/dB set OFF" : The sound coordinate factors are not appeared.
This function allows you to turn off the lower part of the display if there is too much information in the display.
Display and setting:
"BLK MASK ON" : The display will turn on by using only the upper part of the display and the IN indicator.
"BLK MASK OFF" : The display will turn on by using the whole part of the display.
Time setting for removing the faceplateYou can set the interval during which the open control panel cannot reverse to be hidden. During the period you have set,
Adjust the bass boost level of the external amplifier using the main unit.
Display and setting:
"AMP BASS FLT" : Bass boost level is flat.
"AMP BASS +6" : Bass boost level is low (+6dB).
"AMP BASS +12" : Bass boost level is high (+12dB).
NOTE
As of December 1999, the power amplifiers controllable by the main unit are as follows:
— 31 —