The faceplate of the unit can be detached and taken with you,
helping to deter theft.
Removing the Faceplate
1Turn the ignition OFF or press the [SRC] button for at least 1
second.
The power turns OFF and the faceplate slides open.
2Holding the center part of the faceplate pull it out.
•When the faceplate is kept remove open, according to the <OFF
Wait Time Setting> (page 19) setting, the faceplate is hidden and
the power turns OFF.
•The faceplate is a precision piece of equipment and can be
damaged by shocks or jolts. For that reason, keep the faceplate in
its special storage case while detached.
•Do not expose the faceplate or its storage case to direct sunlight
or excessive heat or humidity. Also avoid places with too much
dust or the possibility of water splashing.
Reattaching the Faceplate
1Set the left side of the faceplate in the faceplate bracket.
2Press the right side of the faceplate until it locks.
Theft Deterrent Faceplate
Press the [ANG] button for at least 1 second.
Do not apply excessive force to the faceplate. It can cause damage.
Faceplate Angle Adjustment
Selecting the display when this device is switched to Auxiliary
input source.
1Select Auxiliary input source
Press the [SRC] button.
Select the "AUX" display.
2Enter Auxiliary input display setting mode
Press the [DISP] button for at least 2 seconds.
The presently selected AUX Name is displayed.
3Select the Auxiliary input display
Press the [4] or [¢] button.
Each time the button is pressed it switches through the below
displays.
• "AUX"
• "TV"
• "VCP"
• "GAME"
• "PORTABLE"
4Exit Auxiliary input display setting mode
Press the [DISP] button.
When operation stops for 10 seconds, the name at that time is
selected, and Auxiliary input display setting mode closes.
Auxiliary Input Display Setting
General features
— 10—
English
KDC-8020_U.S (M_K) r4 01.10.19 1:52 PM Page 10