4Select the character type
Press the [38] button.
Each time the button is pressed the character type switches as
shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5Select the characters
Press the [FM] or [AM] button.
Characters can be entered by using a remote with a number
buttons.
Example: If "DANCE" is entered.
Character Button #Times pressed
"D" [#3] 1
"A" [#2] 1
"N" [#6] 2
"C" [#2] 3
"E" [#3] 2
6Repeat steps 3 through 5 and enter the name.
7Exit name set mode
Press the [NAME.S] button.
•When operation stops for 10 seconds the name at that time is
registered, and Name Set mode closes.
•Memory numbers
- FM: 32 stations
- AM: 16 stations
- Internal CD player: 30 discs
- External CD changer/ player: Varies according to the CD changer/
player. Refer to the CD changer/ player manual.
•The title of station/CD can be changed by the same operation
used to name it.
Attaching a title to a Station or CD.
1Receive/play the station/disc you want to attach a title to
•A title can't be attached to a MD.
•Disc Naming can't be done during CD text display.
2Enter name set mode
Press the [NAME.S] button for at least 2 seconds.
"NAME SET" is displayed.
3Move the cursor to the enter character position
Press the [4] or [¢] button.
Station/Disc Naming (SNPS/DNPS)
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Speaker Setting mode
Press the [Q] button.
3Select the Speaker type
Press the [4] or [¢] button.
Each time the button is pressed the setting switches as shown
below.
Speaker type Display
OFF "SP OFF"
For 6 & 6x9 in. speaker "SP 6*9/6inch"
For 5 & 4 in. speaker "SP 5/4inch"
For the OEM speaker "SP O.E.M."
4Exit Speaker Setting mode
Press the [Q] button.
— 9—
KDC-8020_U.S (M_K) r4 01.10.19 1:52 PM Page 9