Setting the operation check sound (beep sound) ON/OFF.
Display Setting
"Beep ON" Beep is heard.
"Beep OFF" Beep canceled.
Touch Sensor Tone
If you enter a Code different from your Security Code, you have to
start over from step 4.
Press the Reset button and when it's removed from the
battery power source
1Turn the power ON.
2Do the step 4 and 5 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.
If an incorrect code is input, "WAITING" is displayed, and the input
prohibited time shown below is generated.
After the input prohibited time lapses, "CODE" is displayed, and
input can be done.
Number of times Input prohibited time
the incorrect code was input
1—
25 minutes
31 hour
424 hours
Because authorization by the Security Code is required when it's
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
When the Security Code function is activated it can't be released.
Note, your Security Code is the 4 digit number entered in your "Car
Audio Passport" in this package.
1Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4Enter the Security Code
Press the [#1] — [#4] button.
Example: If your Security Code is "3510".
Step Button #Times pressed Display
1[#1] 4 "3"
2[#2] 6 "5"
3[#3] 2 "1"
4[#4] 1 "0"
5Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
6Do the step 4 and 5 step operation, and reenter the security
code.
"APPROVED" is displayed.
The Security Code function activates.
Security Code
Menu system
— 18—
English
KDC-8020_U.S (M_K) r4 01.10.19 1:53 PM Page 18