Installation
Accessories
| A × 1 B × 4 C × 4 D × 1 | E × 1 | F × 1 G × 1 | H × 1 |
Removing the transportation screws
Remove all 3 transportation screws for protecting the internal mechanism before you start to install the unit.
•After removing the transport screw, retain it carefully and attach it again before transporting the unit again.
Transportation screws
Angle adjustment switches
Left side
Angle adjustment switches��
��
�
• The angle adjustment switches on the both side of the |
unit are to be set according to the angle of installation |
of the CD auto changer. Set both of the two switches |
| to the same position. If the switches are not set |
properly, sound skip or other malfunction may occur. |
• Set the angle adjustment switches with a coin or other |
Right side
�
��
��
| flat object. |
• Change the switch step by step by detaching and |
| reusing the obdect at the end of each step. |
| Installation angle | ||||
| Angle adjustment | 0 | 0 | 0 | |
| switch position | 45 | 45 | 45 | |
90 | 90 | 90 | ||
|
It is not possible to install at an angle of 40°~50° if only A is used.
10 English