Kenwood KDC-MP333V Disc source, Audio file source, The messages shown below display your systems condition

Disc source

?The specified disc does not play, but another one plays instead.

✔The specified CD is quite dirty.

☞Clean the CD.

✔The disc is severely scratched.

☞Try another disc instead.

?Can’t remove disc.

✔The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF.

☞The disc can only be removed within 10 minutes of the ACC switch being turned OFF. If more than 10 minutes has elapsed, turn the ACC switch ON again and press the Eject button.

?The disc won’t insert.

✔There’s already another disc inserted.

☞Press the [0] button and remove the disc.

?Direct Search can’t be done.

✔Another function is ON.

☞Turn Random Play or other functions OFF.

Audio file source

?Cannot play an Audio file.

✔The media is scratched or dirty.

☞Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5).

?The sound skips when an Audio file is being played.

✔The media is scratched or dirty.

☞Clean the media, referring to the CD cleaning of the section on <About CDs> (page 5).

✔The recording condition is bad.

☞Record the media again or use another media.

?The Audio file track time isn’t displayed correctly.

✔---

☞There are times when it isn’t displayed correctly according to the Audio file recording conditions.

The messages shown below display your systems condition.

TOC ERR:	The CD is quite dirty. The CD is upside-
	down. The CD is scratched a lot.
	➪ Clean the CD and load it correctly.
E-05:	The CD is upside-down.
	➪ Load the CD correctly.
E-99:	The unit is malfunctioning for some reason.
	➪ Press the reset button on the unit. If the
	"E-99" code does not disappear, consult
	your nearest service center.
READING:	The unit is reading the data on the disc.
IN (Blink):	The CD player section is not operating
	properly.
	➪ Reinsert the CD. If the CD cannot be
	ejected or the display continues to flash
	even when the CD has been properly
	reinserted, please switch off the power
	and consult your nearest service center.
PROTECT:	The speaker wire has a short-circuit or
	touches the chassis of the vehicle, and
	then the protection function is activated.
	➪ Wire or insulate the speaker cable
	properly and press the reset button.
NA FILE:	An Audio file is played with a format that
	this unit can’t support.
	➪ ----
COPY PRO:	A copy-protected file is played.
	➪ ----
PRK OFF:	No parking brake is applied during
	playback of the Video CD.

English 25