Connecting Wires to Terminals
Video output (Yellow)
To the monitor unit | VIDEO OUT | |
Connection cable (Accessory6) | ||
To parking brake detection | SW | |
PRK | ||
|
switch harness of car.
Parking sensor wire (Light green)
For the sake of safety, be sure to connect the parking sensor.
Fuse (10A)
Rear left output (White) Rear right output (Red)
L
R
FM/AM antenna input
If no connections are made, do not let the wire come out from the tab. | Wiring harness |
(Accessory1) |
When using the optional power amplifier, connect to its power control terminal.
Depending on what antenna you are using, connect either to the control terminal
of the motor antenna, or to the power terminal for the booster amplifier of the
Power control wire (Blue/White)
P.CONT
Motor antenna control wire (Blue)
ANT CONT
Connect to the terminal that is grounded when either the telephone rings or during conversation.
To car light control switch
To front left speaker
To front right speaker
To rear left speaker
To rear right speaker
Ignition key switch
Car fuse box (Main fuse)
Battery + | – |
20 English
TEL mute wire (Brown)
MUTE
Dimmer control wire (Orange / White)
ILLUMI
White/Black |
|
White | FRONT L |
| |
Gray/Black |
|
Gray | FRONT R |
| |
Green/Black |
|
Green | REAR L |
Purple/Black |
|
Purple | REAR R |
| |
Car fuse box |
|
ACC | Ignition wire (Red) |
| Battery wire (Yellow) |
| Ground wire (Black) - (To car chassis) |