Function of
Satellite Radio tuner control (Optional)
Basic Operation
Selecting Satellite Radio source
Press the [SRC] button.
Select the “SAT”/ “SIRIUS”/ “XM” display.
⁄
•You need to register to the service provider to receive the service by Satellite Radio. Consult the service provider if “CALL … TO SUBSCRIBE” appears.
•The radio may take a little time to start receiving after you select the Satellite Radio source.
•If the signal reception fails, “Acquiring Signal”/ “No Signal” appears.
Switching Seek Mode
Display |
| Operation |
“CHANNEL” |
| Normal manual seeking control. |
“PRESET” |
| Search in order of the channels in the Preset memory. |
For how to select menu items, refer to <Menu System> (page 6).
Select the channel
Press the [4] or [¢] button.
Selecting the Preset Band
Press the [FM+] button.
Each time you press the button, the preset band alternates between the SR1, SR2, SR3 and SR4.
Channel Scan
Press the [FM+] button for at least 2 seconds.
Pressing this button for 2 seconds or longer allows you to check individual channel for 10 seconds each. Pressing this button again for 2 seconds or longer allows you to exit this mode.
Preset Memory
Press the desired [1] — [6] button for at least 2 seconds.
Preset Tuning
Press the desired [1] — [6] button.
Category and Channel Search
Selecting the channel and category you want to receive.
1Enter Category and Channel Search mode Press the Search button.
2Select the Category
Press the [FM+] or
3Select the Channel
Press the [4] or [¢] button.
Cancelling Category and Channel Search mode Press the Search button.
⁄
•You cannot Channel search until the category information is acquired.
Function of remote control
Direct Access Tuning
Entering the channel and tuning.
1Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote control.
2Enter the channel
Press the number buttons.
3Do Channel Search
Press the [4] or [¢] button.
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote control.
⁄
•If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled.
•If you cannot receive any signal in the input Channel due to bad conditions on radio wave or other such problems, “Acquiring Signal”/ “No Signal” appears.
14