Kenwood KDC-MP242U, KDC-MP342U • AUX, • ICON, Operation, Operation, Menu Glossary, SPRM (Supreme), SWPRE (Switching Preout), For operating KCA-BT200(Optional)

For operating KCA-BT200 (Optional)

For operation refer to Model-A-1 in the Instruction Manual of KCA-BT200, and the table below. The [AUTO]/[TI] button should be replaced with [SRC] button for <Answering the Waiting Call after Terminating the Current Call>.

Menu Glossary

• ICON

Sets the Graphics mode of the display during

normal playback condition.

ON1: Turns on.

ON2: Displays an animation.

Notation used in the KCA-BT200 Instruction Manual

[38] button

Control knob

[AUTO]/[TI] button

Control knob towards up or down

Control knob towards left or right

Operation

[AUD] knob

[DISP] button

[FM+] or [AM–] button

[4] or [¢] button

	OFF: Turns off.
•	SWPRE (Switching Preout)
	Switches the preout between rear output (“R”) and
	subwoofer output (“SW”).
•	SPRM (Supreme)
	Technology to extrapolate and supplement with
	proprietary algorithm, the high-frequency range
	that is cut off when encoding at low bit rate (less
	than 128Kbps, Sampling frequency is 44.1kHz).
	Supplementing is optimized by compression

For operating KCA-BT100 (Optional)

To control KCA-BT100, operate as follows;

To make setting for <Selecting the Dialing Mode>, select <Menu system> (page 6). Pressing the [AUD] knob for at least 1 second after selecting the "D.MODE" item allows you to enter the dialing method selection mode. To exit from dialing method selection mode, press Search button.

To make <Disconnecting a Call>, <Clearing the Disconnection Massage>, and <Rejecting an Incoming call>, press [DISP] button for at least 1 second.

Moreover, some displays are different from the description of KCA-BT100 Instruction Manual.

format (MP3 or WMA) and processed according to

bit rate.

The effect is negligible with music that is encoded

at high bit rate, variable bit rate or has minimal high

frequency range.

• AUTO1, AUTO2, MANUAL (Tuning mode select)

Select a tuning mode of the radio.

Tuning mode	Display	Operation
Auto seek	“AUTO1”	Automatic search for a station.
Preset station seek	“AUTO2”	Search in order of the stations in the
		Preset memory.
Manual	“MANUAL”	Normal manual tuning control.

• AUX

Displays of KCA-BT100 Instruction Manual

“DISCONCT”

“CONNECT”

“PHN-DEL”

“P-STATUS”

“BT-CON Y”

“BT-CON N”

Actual displays on this unit

“HF D-CON”

“HF CON”

“DVC-DEL”

“D-STATUS”

“HF-CON Y”

“HF-CON N”

When this is set to ON, AUX source can be selected.

ON1: Outputs the sound of external unit connected

to the AUX terminal when switched to AUX

source.

ON2: Activates the attenuator function when

switched to AUX source.

Turn off the attenuator function when

listening to output from external unit. This

prevents the noise when no external unit is

connected to AUX terminal.

OFF: Disables the selection of AUX source.

Set to OFF when not using the AUX terminal.

English 17