Menu Glossary

•SWPRE (Switching Preout)

Switches the preout between rear output (“R”) and subwoofer output (“SW”).

•SPRM (Supreme)

Technology to extrapolate and supplement with proprietary algorithm, the high-frequency range that is cut off when encoding at low bit rate.

Supplementing is optimized by compression format (MP3 or WMA) and processed according to bit rate.

The effect is negligible with music that is encoded at high bit rate, variable bit rate or has minimal high frequency range.

•CD READ

Sets the method for reading CD.

When unable to play special format CD, set this function to “2” to force playing. Note that some music CD may be unplayable even when set to “2”. In addition, audio files cannot be played when set to “2”. Normally, keep this set to “1”.

1 : Automatically distinguishes between audio file disc and music CD when playing disc.

2 : Forces playing as music CD.

•AUX

When this is set to ON, AUX source can be selected. ON1: Outputs the sound of external unit connected

to the AUX terminal when switched to AUX source.

ON2: Activates the attenuator function when switched to AUX source.

Turn off the attenuator function when listening to output from external unit. This prevents the noise when no external unit is connected to AUX terminal.

OFF: Disables the selection of AUX source.

Set to OFF when not using the AUX terminal.

•AUTO1, AUTO2, MANUAL (Tuning mode select) Select a tuning mode of the radio.

Tuning mode

Display

Operation

Auto seek

 

“AUTO1”

 

Automatic search for a station.

Preset station seek

 

“AUTO2”

 

Search in order of the stations in the

 

 

 

 

Preset memory.

Manual

“MANUAL”

Normal manual tuning control.

•LO.S

When this function is turned on the auto seek turning automatically searches for station with good reception.

It is especially useful searching station with SW1 band or SW2 band.

•ICON

Sets the Graphics mode of the display during normal playback condition.

ON1: Turns on.

ON2: Displays an animation.

OFF: Turns off.

The marking of products using lasers (Except for some areas)

CLASS 1

LASER PRODUCT

The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. This means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

English 15