Kenwood Audio Control, Audio Setup, Speaker Setting, Switching Display, Range, Range, Display, Display, Display, Display, Display, Information, Information

General Operation

Audio Control

1Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the [AUD] knob.3Select the Audio item to adjust Press the [AUD] knob.

Adjustment Item		Display		Range
Subwoofer level		“SW L”		–15 — +15
Bass Boost	“B.BOOST”/“B.B”			“1”/”2”/“OFF” (The
				indicator turns on
				according to the setting.)
System Q	“NATURAL/“ROCK”/			Natural/Rock/Pops/Easy/
	“POPS”/“EASY”/			Top 40/Jazz/Game/User
	“TOP40/“JAZZ”/			setting
	“GAME”/“USER”
Bass level		“BAS L”	–8 — +8
Middle level	“MID L”		–8 — +8
Treble level	“TRE L”			–8 — +8
Balance		“BAL”	Left 15 — Right 15
Fader		“FAD”		Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

⁄

•“USER”: This appears when Bass level, Middle level, and Treble level are adjusted. When “USER” is selected, these levels are recalled.

4Adjust the Audio item Turn the [AUD] knob.5Exit Audio Control mode Press any button.

Press a button other than the [AUD] knob.

Audio Setup

Setting the Sound system.

1Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the [AUD] knob for at least 1 second.3Select the Audio Setup item to adjust Press the [AUD] knob.

Adjustment Item		Display		Range
Low Pass Filter		“LPF”		80/120/160/Through(OFF) Hz
Volume offset	“V-OFF”		–8 — ±0 (AUX: -8 — +8)

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

4Adjust the Audio setup item Turn the [AUD] knob.5Exit Audio Setup mode

Press the [AUD] knob for at least 1 second.

Speaker Setting

Fine-tuning so that the System Q value is optimal when setting the speaker type.

1Enter Standby

Press the [SRC] button. Select the “STANDBY” display.

2Enter Speaker Setting mode Press the [AUD] knob.3Select the Speaker type Turn the [AUD] knob.

Speaker type		Display
OFF		“SP OFF”
For 5	& 4 in. speaker	“SP 5/4”
For 6	& 6x9 in. speaker	“SP 6*9/6”
For the OEM speaker		“SP OEM”

4Exit Speaker Setting mode Press the [AUD] knob.

Switching Display

Changes displayed information on each source following;

In Tuner source

	Information		Display
	Frequency		“FREQ”
	Clock		“CLOCK”
In CD & External disc source
	Information		Display
	Disc title	“D-TITLE”
	Track title		“T-TITLE”
	Play time & Track number		“P-TIME”
	Clock		“CLOCK”

6 KDC-MP443/KDC-MP3043/KDC-MP343/KDC-MP243/KDC-MP243SW