Kenwood General functions, knob, [AUD], button, [] [D], [SRC] Release, Search [DISP], Auxiliary input, Auxiliary input, [1] [2] [3] [4] [5] [6]

Basic Operation

[SRC] Release [FM+] [AM–] Disc slot Display [] Auxiliary input

Search [DISP]	[AUD]	[] [D]
button	knob

General functionsPower/Source select button: [SRC]

Turns on the power.

When the power is on, the source switches between Tuner (“TUNER”) , CD (“CD”) , Auxiliary input (“AUX”), and Standby (“STANDBY”) each time this button is pressed.

Press at least 1 second to turn off the power.

⁄

•When an optional accessory is connected, the source name for each device appears (KDC-MP443 only).

Volume control: [AUD] knob

Turn the knob to adjust the volume.

Faceplate release: Release

Releases the faceplate lock so that it can be removed. Refer to the following diagram when reattaching the faceplate.

[1] [2] [3] [4] [5] [6]Auxiliary input

Connect a portable audio device with mini-plug cable (3.5 ø).

⁄

•Use the mini-plug cable which is stereo type and does not have any resistance.

Muting volume upon reception of phone call

When there is a call, “CALL” is displayed and the audio system is paused.

When the call ends, “CALL” disappears and the audio system comes back on.

The audio system comes back on when [SRC] is pressed during a call.

Subwoofer output: [AM–]

Switches between ON (“SW ON”) and OFF (“SW OFF”) each time the bottom side is pressed for at least 2 seconds.

Switching display: [DISP]

Changing the information displayed. Refer to page 6 for the details of the display setting.

¤

•The faceplate is a precision piece of equipment and can be damaged by shocks or jolts.

•Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.

4 KDC-MP443/KDC-MP3043/KDC-MP343/KDC-MP243/KDC-MP243SW