First step
Control Knob
[ ] [FNC] | [ENTER] |
Exit Demonstration Mode
Turn off the demonstration mode when you use it for the first time after installation.
1Press the [ENTER] button to quit the demonstration mode when the messages “To Cancel DEMO Press the ENTER Key” are displayed (approx. 15 seconds).
2Turn the Control knob to select “YES”, and then press the [ENTER] button. The demonstration mode can also be canceled in the Function setting mode. Refer to <Function setting> (page 16) of Instruction manual.
Adjusting the Clock & Date
1Press the [FNC] button to enter the Function setting mode.
2The item can be selected and determined as follows.
”Settings” ➜“Clock & Date” ➜“Clock Adjust”
To select the item, turn the Control knob. To determine the item, press the [ENTER] button.
3Turn the Control knob to adjust the hour, and then press the [ENTER] button.
4Turn the Control knob to adjust the minute, and then press the [ENTER]
4 Quick Start Guide
button.
5Turn the Control knob to select “Date Adjust”, and then press the [ENTER] button.
6Turn the Control knob to adjust the year, and then press the [ENTER] button.
7Turn the Control knob to adjust the month, and then press the [ENTER] button.
8Turn the Control knob to adjust the day, and then press the [ENTER] button.
9Turn the Control knob to select “Date Mode”, and then press the [ENTER] button.
10 Turn the Control knob to select Date format, and then press the [ENTER] button.
11 Press the [ ] button for at least 1 second to exit the Function setting mode.