Manuals / Brands / Home Audio / CD Player / Kenwood / Home Audio / CD Player

Kenwood Frequency Step Setting, 1Turn the power OFF, 2Switch the frequency step, Press the [SRC] button for at least 1 second, English |

Models: KDC-U3046 KDC-U346 KDC-U4046 KDC-U446 KDC-U5046

1 24

Download 24 pages, 678.2 Kb

Tuner Operation

Frequency Step Setting

Changing the tuning frequency step.The original setting is FM band 50 kHz, MW band 9 kHz.1Turn the power OFFPress the [SRC] button for at least 1 second.2Switch the frequency stepWhile pressing the [1] and [5] buttons, press the [SRC] button.Release your fingers from the button after the display appears.The frequency step changes to FM band 200 kHz, and MW band 10 kHz.

⁄

•When the same operation is repeated, the frequency step returns to the original setting.

•When the frequency step is changed, the frequencies in the memory are deleted.

English 15

Contents

Page Before Use Basic Operations General Appendix Connecting Wires to Terminals 2WARNING To prevent injury or fire, take the following precautions: Before using this unit for the first time the Demonstration mode. Refer to <Exit of the Demonstration Mode> (page 4) How to reset your unit [ ] Release [SRC] [DISP] [ ] [BAND] [VOL] [] [D] [1][2] [3][4] [5][6] Before Using Exit of the Demonstration Mode Playing Music (CD/USB/iPod) Playing Disc Playing USB device Folder select Song select Removing the Faceplate Detach the faceplate Reattaching the Faceplate Muting Volume upon Reception of Phone Call When a call comes in Display Indicator KDC-U346/ KDC-U4046/ KDC-U3046 KDC-U446/ KDC-U5046 Text Display Selection In Tuner source Function item Next page Function List Function items appearing during standby Function items appearing when the tuner source is selected Function items appearing when the CD & audio file source is selected Function items appearing when the iPod source is selected Function items appearing when an AUX source is selected Play Function Repeat play Random play Function of Audio file/ CD source Music Search Music Search for iPod Alphabet Search Cancelling the Alphabet Search mode My Playlist for iPod Registering Songs in the Playlist Playing the Song in the Playlist Deleting a Song from the Playlist iPod Control by Hand Mode Frequency Step Setting Accessory of KDC-U446/KDC-U346/KDC-U5046/KDC-U3046 In iPod/CD/Audio file source Preparing the remote control unit General control In Tuner source About Audio file •Playable Audio file MP3 (.mp3), WMA (.wma) •Playable disc media CD-R/RW/ROM •Playable disc file format ISO 9660 Level 1/2, Joliet, Romeo, Long file name About USB device •You cannot connect a USB device via a USB hub and Multi Card Reader •When connecting the USB device, usage of the CA- U1EX (option) is recommended About “KENWOOD Music Editor” The marking of products using lasers (Except for some areas) Accessories Installation Procedure (Optional accessory) USB connector AUX input (Stereo) Use the mini-plugcable which is stereo type and does not have any resistance Non-JapaneseCars Japanese Cars Removing the Hard Rubber Frame Removing the Unit Some functions of this unit may be disabled by some settings made on this unit General ?The Touch Sensor Tone (beep sound) does not sound ✔The preout jack is being used ☞The Touch Sensor Tone cannot be output from the preout jack Tuner source The messages shown below display your systems condition TOC ERROR: The CD is scratched a lot ERROR 05: The disc is unreadable FM tuner section Frequency range 200 kHz space :87.9 MHz – 107.9 MHz 50 kHz space :87.5 MHz – 108.0 MHz Usable sensitivity (S/N = 26dB)