16 | Quick Start Guide
Installing/Removing the unit
Non-Japanese cars
Bend the tabs of the mounting sleeve
with a screwdriver or the like and
attach it in place.
<
• Makesurethattheunitisinstalled
securelyinplace.Iftheunitisunstable,it
maymalfunction(forexample,thesound
mayskip).
Japanese cars
1 Removethetrim platewithreferenceto
<Removingthetrimplate>.
2 Aligntheholesintheunit(twolocations
oneachside)withthevehiclemounting
bracketandsecuretheunitwiththe
accessoryscrews.
8 mm
MAX.
ø5mm ø5mm
8mm
MAX.
34
Removing the trim plate
1 Engagethecatchpins ontheextraction
key(Accessory2)andreleasethetwo
locksontheupperpartofframe.
Liftupandpulltheframeforwardas
showninthefigure.
Catch
Lock
Accessory2

2

Whentheupperpartofframeis
removed,removethelowerpartofframe.
<
• Theframecanberemovedfromthe
bottomsideinthesamemanner.
Removing the unit
1 Removethetrim platewithreferenceto
<Removingthetrimplate>.
2 Removethefaceplate.
3 Insertthetwoextractionkeys
(Accessory2)deeplyintotheslotson
bothsidesasshown.
4 Lowerthe extractionkeytowardthe
bottom,andthenpullouttheunit
halfwaywhilepressingtheextractionkey
towardstheinside.
Accessory2

!

• Becarefultoavoidinjuryfromthecatch
pinsontheextractionkey.
5 Pulltheunitallthewayoutwithyour
hands,beingcarefulnottodropit.
B59-2188-10_01_13Stepup_QSG_M_En.indd 16 13/06/04 13:37