English | 3
Before use
• Todisplaycharactersinthefollowing
language,additionalsettingisrequired.
KDC-U7056DAB KDC-U7056BT
-Chinese
Referto“Chinese”of<12-5.Initial
settings>.
KDC-U7056BTL
-Arabic
-Persian
-Thai
Referto“TAGLanguage”of<12-5.Initial
settings>.

About the discs used with this unit

• ThisunitcanonlyplaytheCDswith
.
• Thefollowingdiscscannotbeused:
- Adiscthatisnotround
- Adiscwithcoloringontherecording
surfaceoradiscthatisdirty
- Arecordable/rewritablediscthathas
notbeenfinalized(Forthefinalization
process,refertotheinstructionmanual
thatcamewithyourdiscwriting
softwareoryourdiscrecorder.)
- An8cm(3inch)disc(Anattempt
toinsertusinganadaptercancause
malfunction.)

Handling discs

• Donottouchtherecordingsurfaceof
thedisc.
• Donotsticktapeetc.onthedisc,orusea
discwithtapestuckonit.
• Donotuseanyaccessoriesforthedisc.
• Donotuseanysolventstocleandiscs.
Useadrysiliconorsoftcloth.
• Cleanthediscbymovingthecloth
outwardfromthecenterofthedisc.
• Whenremovingadiscfromthisunit,pull
itouthorizontally.
• Ifthecenterholeoroutsiderimofadisc
hasburrs,removethembeforeinserting
adisc.

! CAUTION

• Keepbatteryoutofreachofchildren
andinoriginalpackageuntilreadyto
use.Disposeofusedbatteriespromptly.
Ifswallowed,contactaphysician
immediately.
• Donotleavethebatterynearfireor
underdirectsunlight.Afire,explosion
orexcessiveheatgenerationmayresult.
• Donotsettheremotecontrolinhot
placessuchasonthedashboard.
• TheLithiumbatteryisindangerof
explosionifreplacedincorrectly.
Replaceitonlywiththesameor
equivalenttype.
The illustrations of the display and panel appearing
in this manual are examples used to explain more
clearly how the controls are used. Therefore, what
appears on the display in the illustrations may differ
from what appears on the display on the actual
equipment, and some of the images on the display
may be inapplicable.

How to reset your unit

Iftheunitfailstooperateproperly,pressthe
Resetbutton.Theunitreturnstothefactory
settings.
Reset button
B59-2188-10_01_13Stepup_QSG_M_En.indd 3 13/06/04 13:36