Kenwood KDC-5024, KDC-5024V, KDC-507, KDC-5094R, KDC-6024, KDC-M6024, KDC-M6024G, KDC-V6524 Installation

— 33 —

Installation

Make sure that the unit is installed securely in place. If the unit is

unstable, it may malfunction (eg, the sound may skip).

Bend the tabs of the

mounting sleeve

with a screwdriver or

similar utensil and

attach it in place.

Metal mounting

strap

(commercially

available)

Self-tapping

screw

(commercially

available)

Firewall or metal support

■Installation

Screw (M4X8)

(commercially

available)

■Screwing the Faceplate on the Unit

If you want to fasten the faceplate to the main unit so that it

does not fall off.

1Refer to the section <Removing the hard rubber frame> (page

34) and then remove the hard rubber frame.

2Drop open the faceplate by pressing the Release button. Never insert the screws in any other screw hole than the one specified.

If you screw them in another hole, it will contact and may cause

damage to the mechanical parts inside the unit.

4Tighten the screws (ø2 × 4 mm) (Accessory 5) in the holes

shown on the diagram.

Accessory6

5Tighten the screws (ø2 × 6mm) (Accessory 6) in the holes

shown on the diagram.

Accessory5

3Tighten the screws (ø2.6 × 12 mm) (Accessory 4) in the holes

shown on the diagram.

Accessory4

KDC-M6024G_U.S r4 02.10.31 11:46 AM Page 33

Contents

Main Contents Safety precautions To prevent injury and/or fire, take the following precautions: 2WARNING To prevent damage to the machine, take the following precautions: 2CAUTION IMPORTANT INFORMATION CLASS 1 LASER PRODUCT About CDs About GSM Hands Free Unit Handling CDs When using a new CD CD accessories Notes on playing MP3 Acceptable media Acceptable medium formats Settings for your MP3 encoder and CD writer Entering ID3 tag MP3 playing order Volume Power Selecting the Source 4 5 Audio Control 1 2 1 2 3 4 1 Auxiliary Input Display Setting 2 3 4 1 2 1 Tuner features Non-fading Output 1 Tuning 2 Tuner features 1 2 Preset Tuning 2 Traffic Information PTY (Program Type) Radio Text Scroll 1 Program Type preset 2 3 4 2 Changing Language for PTY Function 3 4 3 1 2 3 1 2 Track/File/Disc/Folder Repeat Playing External Disc Disc/ Folder Search Disc Search (Function of disc changer) Folder Search (Function of MP3) Fast Forwarding and Reversing Track/File Search 1 2 1 Folder Select (Function of MP3) Disc Naming (DNPS) 2 3 1 2 3 Text/Title Scroll Page DSI (Disabled System Indicator) Synchronize Clock Touch Sensor Tone Manual Clock Adjustment 4 1 2 Contrast Adjustment Selectable Illumination 1 2 Tuning Mode <In Tuner mode> Switching preout <In Standby mode> Local Seek <In Tuner mode> News Bulletin with Timeout Setting Dimmer External Display Control Auto Memory Entry <In Tuner mode> Monaural Reception <In FM reception> Auto TP Seek AF (Alternative Frequency) CD Read Setting <In Standby mode> Power OFF Timer Text Scroll Accessories .........1 Installation Procedure 14 .........2 2 .........1 3.........1 Connecting Wires to Terminals Connector Function Guide Connecting Wires to Terminals KDC-M6024G_U.S r4 02.10.31 11:46 AM Page 32 Connecting the ISO Connector Installation Installation Screwing the Faceplate on the Unit 1 2 Page Troubleshooting Guide ? Troubleshooting Guide ? Tuner source ? Disc source The messages shown below display your systems condition. Specifications FM tuner section Specifications subject to change without notice. MW tuner section LW tuner section