Menu Operation

Security Code

When Security Code is set, possibility of theft is reduced because input of Security Code is prompted to turn on the unit once it is turned off.

⁄

•When you activate the Security Code function, it cannot be released.

Note, your Security Code is the 4 digit number entered in your “Car Audio Passport” in this package.

1Select Security Code item during Menu mode Select the “SECURITY SET” display.

For how to select menu items, refer to <Menu System>(page 11).

2Enter Security Code mode

Press the Control knob for at least 1 second. When “ENTER” is displayed, “CODE” is also displayed.

3Select the digits to enterPush the Control knob towards right or left.4Select the Security Code numbers

Push the Control knob towards up or down.

5Repeat steps 3 and 4, and complete the Security Code.6Confirm the Security Code

Press the Control knob for at least 3 seconds. When “RE-ENTER” is displayed, “CODE” is also displayed.

7Do the step 3 through 6 step operation, and reenter the security code.

“APPROVED” is displayed.

The Security Code function activates.

⁄

•If you enter a Code different from your Security Code, you have to start over from step 3.

8Exit Security Code mode Press the [M.JOG] button.

Entering Security Code

The Security Code is required to use the audio unit when the unit is first used after removed from the battery power source or the Reset button is pressed.

1Turn the power ON.2Do the step 3 through 6 step operation, and reenter the security code.

“APPROVED” is displayed.

⁄

• If an incorrect code is entered, “WAITING” is displayed,

and the input prohibition periods shown in the table below is generated.

After the input prohibition time lapses, “CODE” is displayed, and you can reenter the code.

Number of times theInput prohibited time

incorrect code was input

 

1

—

2

5 minutes

3

1 hour

4

24 hours

Manual Clock Adjustment

1Select Clock Adjustment item during Menu mode

Select the “CLOCK ADJUST” display.

For how to select menu items, refer to <Menu System>(page 11).

2Enter Clock Adjust modePress the Control knob for at least 1 second. The clock display blinks.3Adjust the time

Push the control knob towards up or down to adjust the hours and right or left to adjust the minutes.

4Exit Clock adjustment mode Press the [M.JOG] button.

⁄

•You can do this adjustment when the “SYNC” is set as “OFF”.

12 KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041