Kenwood Audio Control, Audio Setup, Range, Range, Display, Display, 5Exit Audio Setup mode, 2Enter Audio Setup mode, 5Exit Audio Control mode Press any button

General Operation

Audio Control

You can adjust following Audio Control items;

Adjustment Item	Display	Range
Rear volume*	“R-VOLUME”	0 — 35
Subwoofer level	“SUB-W L”	–15 — +15
Bass Boost**	“B.BOOST-L”	“L1”/”L2”/“OFF” (The
		indicator turns on according to
		the setting.)
System Q	“NATURAL”/	Natural/User setting/Rock/
	“USER”/“ROCK”/	Pops/Easy/Top 40/Jazz
	“POPS”/“EASY”/	(The indicator turns on
	“TOP40”/“JAZZ”	according to the setting.)
Bass level	“BASS L”	–8 — +8
Middle level	“MID L”	–8 — +8
Treble level	“TRE L”	–8 — +8
Balance	“BALANCE”	Left 15 — Right 15
Fader	“FADER”	Rear 15 — Front 15

Exit Audio Control mode (Volume control mode)

*Function of KDC-W5641U/W5541U/W5141U/W5041U. **Function of KDC-W4141/W4041.

⁄

•“USER”: The customized Bass, Middle, and Treble levels are effective. On the KDC-W5641U/W5541U/W5141U/ W5041U, this item can be selected at any time. On the KDC-W4141/W4041, this item is displayed only when the tone quality has been adjusted. On the KDC-W4141/ W4041, this item disappears when another setting is selected.

•You can set Bass, Middle, and Treble for each source.

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Control mode Press the Control knob.3Select the Audio item to adjust Press the Control knob.4Adjust the Audio item Turn the Control knob.5Exit Audio Control mode Press any button.

Press a button other than the Control knob or 0 button.

Audio Setup

You can set Sound system , such as follows;

Adjustment Item	Display	Range
Front High Pass Filter*	“HPF F”	Through/80/100/120/ 150/180
		Hz
Rear High Pass Filter*	“HPF R”	Through/80/100/120/ 150/180
		Hz
Low Pass Filter	“LPF SW”	60*1/80/120/160*2/Through Hz
Subwoofer Phase*	“PHASE”	Reverse (180°)/ Normal (0°)
Volume offset	“V-OFFSET”	–8 — ±0 (AUX: -8— +8)
Loudness*	“LOUDNESS”	OFF/ON
Dual Zone System*	“2ZONE”	OFF/ON

*Function of KDC-W5641U/W5541U/W5141U/W5041U. *1KDC-W5641U/W5541U/W5141U/W5041U only. *2KDC-W4141/W4041 only.

⁄

•Volume offset: Sets each source’s volume as a difference from the basic volume.

•Loudness: Compensates for low and high tones during low volume. (Only the low tone is compensated for when the tuner is selected as a source.)

•Dual Zone System

Main source and sub source (Auxiliary input) output Front channel and Rear channel separately.

-Set up the channel of sub source by “ZONE2” of <Menu System> (page 11).

-Select Main source by [SRC] button.

-Adjust the volume of Front channel by Control knob.

-Adjust the volume of Rear channel by <Audio Control> (page 6).

-The Audio Control has no effect on sub source.

1 Select the source to adjust Press the [SRC] button.

2Enter Audio Setup modePress the Control knob for at least 1 second.3Select the Audio Setup item to adjust Press the Control knob.4Adjust the Audio setup item Turn the Control knob.5Exit Audio Setup mode

Press the Control knob for at least 1 second.

6 KDC-W5641U/KDC-W5541U/KDC-W5141U/KDC-W5041U/KDC-W4141/KDC-W4041