Push the Control knob towards up or down.
Adjust the minutesPush the Control knob towards right or left.
4Exit Clock adjustment mode Press the [MENU] button.In Standby mode
Synchronize Clock
Synchronizing the RDS station time data and this unit’s clock.
Display | Setting |
"SYNC ON" | Synchronizes the time. |
"SYNC OFF" | Adjust the time manually. |
⁄
• It takes 3 to 4 minutes to synchronize the clock.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI ON" | LED flashes. |
"DSI OFF" | LED OFF. |
Function of
Selectable Illumination
Selecting the button illumination color as green or red.
Display | Setting |
"KEY RED" | The illumination color is red. |
"KEY GRN" | The illumination color is green. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"DISP ON" | Keeps the display on. |
"DISP OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
⁄
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 29) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Ejecting the disc
•Turning off the power
•During function control, such as the Menu System, the display stays on.
In Standby mode
Dimmer
Dimming this unit’s display automatically when the vehicle light switch is turned ON.
Display | Setting |
"DIM AUTO" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
English 25