Function of
Built-in Auxiliary input Setting
Set the
Display | Setting |
"AUX OFF" | When selecting the source there’s no Auxiliary Input. |
"AUX ON" | When selecting the source there’s Auxiliary Input. |
In Standby mode
Power OFF Timer
Setting the timer to turn this unit’s power OFF automatically when Standby mode continues. Using this setting can save the vehicle’s battery power.
Display | Setting |
"OFF – – | Power OFF Timer function is OFF. |
"OFF 20M" | Turns the power OFF after 20 minutes. |
(Original setting) |
|
"OFF 40M" | Turns the power OFF after 40 minutes. |
"OFF 60M" | Turns the power OFF after 60 minutes. |
In Standby mode
CD Read Setting
When there is a problem with playing a CD with special format, this setting plays the CD by force.
Display | Setting |
"CD READ1" | Play CD and Audio file. |
"CD READ2" | Play CD by force. |
⁄
•Some music CDs may not play even in the "CD READ2" mode.
In Standby mode
Firmware version display
Displaying the firmware version with the unit.
1Select the firmware version display mode Push the Control knob towards up or down. Select the "F/W VER" display.
2Display the firmware versionPush the Control knob towards right or left.In Standby mode
Demonstration mode Setting
Sets the demonstration mode.
1Select the Demonstration modePush the Control knob towards up or down. Select the "DEMO" display.2Set the Demonstration modePress the Control knob for at least 2 seconds. Each time you press the knob at least 2 seconds, the Demonstration mode alternates between the settings shown in the table below.
Display | Setting |
"DEMO ON" | The Demonstration mode function is ON. |
"DEMO OFF" | Exit Demonstration mode (Normal mode). |
English 29