Menu system
In Standby mode
Synchronize Clock
Synchronizing the RDS station time data and this unit’s clock.
Display | Setting |
"SYNC ON" | Synchronizes the time. |
"SYNC OFF" | Adjust the time manually. |
⁄
• It takes 3 to 4 minutes to synchronize the clock.
In Standby mode
DSI (Disabled System Indicator)
A red indicator will blink on the unit after the faceplate is removed, warning potential thieves.
Display | Setting |
"DSI ON" | LED flashes. |
"DSI OFF" | LED OFF. |
In Standby mode
Selectable Illumination
Selecting the button illumination color as green or red.
Display | Setting |
"KEY RED" | The illumination color is red. |
"KEY GRN" | The illumination color is green. |
Display Illumination Control
This function turns off the display when you perform no operation for 5 seconds. This function is effective when you are driving at night.
Display | Setting |
"DISP ON" | Keeps the display on. |
"DISP OFF" | Turns off the display when you perform no |
| operation for 5 seconds. |
⁄
•Set the Display Illumination Control when the <Demonstration mode Setting> (page 25) is set to OFF.
•When the display is off, pressing any key will turn on the display.
•When the display is off, you cannot perform any operation except for the following:
•Volume
•Attenuator
•Selecting the source
•Turning off the power
•During function control, such as the Menu System, the display stays on.
Dimmer
You can lower the brightness of the display by using the dimmer function.
Display | Setting |
"DIM ON" | The display dims. |
"DIM OFF" | The display doesn’t dim. |
In Standby mode
Switching preout
Alternating the preout between the rear and subwoofer. (With the subwoofer the sound outputs without being effected by fader control.)
Display | Setting |
"SWPRE R" | Rear preout. |
"SWPRE SW" | Subwoofer preout. |
22 English