Kenwood KDC-W534, KDC-W534Y 2WARNING, 2CAUTION, To prevent injury or fire, take the following precautions:, Attach the panel while you are on the vehicle, Lens Fogging

Safety precautions

2WARNING

To prevent injury or fire, take the following precautions:

•To prevent a short circuit, never put or leave any metallic objects (such as coins or metal tools) inside the unit.

•Mounting and wiring this product requires skills and experience. For safety’s sake, leave the mounting and wiring work to professionals.

Attach the panel while you are on the vehicle

The panel lock arm appears when the panel is removed. Therefore, the panel must be attached while the electrical system of the car is operating.

2CAUTION

To prevent damage to the machine, take the following precautions:

•Make sure to ground the unit to a negative 12V DC power supply.

•Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•Do not place the faceplate (and the faceplate case) in areas exposed to direct sunlight, excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing.

•To prevent deterioration, do not touch the terminals of the unit or faceplate with your fingers.

•Do not subject the faceplate to excessive shock, as it is a piece of precision equipment.

•When replacing a fuse, only use a new fuse with the prescribed rating. Using a fuse with the wrong rating may cause your unit to malfunction.

•Do not apply excessive force to the open faceplate or place objects on it. Doing so will cause damage or breakdown.

•Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit.

Do Not Load 8 cm (3 in.) CDs in the CD slot

If you try to load a 8 cm (3 in.) CD with its adapter into the unit, the adapter might separate from the CD and damage the unit.

Lens Fogging

When you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, this condesnation on the lens may not allow CDs to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a while, consult your Kenwood dealer.

The "AAC" logo is trademark of Dolby

Laboratories.

English 3