Removing the Unit

Removing the hard rubber frame

1Engage the catch pins on the removal tool and remove the two locks on the upper level. Upper the frame and pull it forward as shown in the figure.

Lock

Catch

Accessory2

Removal tool

2When the upper level is removed, remove the lower two locations.

The frame can be removed from the bottom side in the same manner.

Removing the Unit

1Refer to the section <Removing the hard rubber frame> (page 30) and then remove the hard rubber frame.

2Remove the screw (M4 × 8) on the back panel.

3Insert the two removal tools deeply into the slots on each side, as shown.

Screw (M4X8) (commercially available)

Accessory2

Removal tool

4Lower the removal tool toward the bottom, and pull out the unit halfway while pressing towards the inside.

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being careful not to drop it.

30 English