Audio Adjustments

Audio Preset Memory

Registering the value setup by Sound Control. The memory cannot be erased by the Reset button.

1Setup Sound Control

Refer to the following operations to setup the Sound Control.

-<Audio Control> (page 18)

-<Audio Setup> (page 18)

2Select Audio Preset item during Menu mode (Other than Standby mode) Select the “Audio Preset” display.

For how to select Function Control items, refer to <Function Control> (page 6).

3Enter Audio Preset modePress the Control knob for at least 1 second.4Select the Audio Preset Memory Turn the Control knob.

Select the “Memory” display.

5Determine whether to put the Audio Preset in the memory

Press the Control knob. “Memory?” is displayed.

6Put the Audio Preset in the memoryTurn the Control knob to select “YES”, and then press the Control knob.

“Memory Completed” is displayed.

7Exit Audio Preset mode Press the [FNC] button.

⁄

•Register 1 pair of Audio Preset Memory. You cannot register by the source.

•When you press the Reset, all the sources will be the setting value which is registered.

•The following items cannot be registered.

Volume, Balance, Fader, Loudness, Volume offset, Dual Zone System, Rear Volume

Audio Preset Recall

Recalling the sound setup registered by <Audio Preset Memory> (page 20).

1Select the source

For how to select source item, refer to <Power/ Source Select button> of <Basic Operation> (page 4).

2Select Audio Preset item during Menu mode (Other than Standby mode) Select the “Audio Preset” display.

For how to select Function Control items, refer to <Function Control> (page 6).

3Enter Audio Preset mode

Press the Control knob for at least 1 second.

4Select the Audio Preset Recall Turn the Control knob.

Select the “Recall” display.

5Determine whether to recall the Audio Preset Press the Control knob.

“Recall?” is displayed.

6Recall the Audio Preset

Turn the Control knob to select “YES”, and then press the Control knob.

“Recall Completed” is displayed.

7Exit Audio Preset mode Press the [FNC] button.

⁄

•The User memory of “SYSTEM Q” in <Audio Control> (page 18) is changed to the value which was recalled.

•The source tone memory item of <Audio Control> (page

18)is changed to the value which was recalled by the selected source.

20 KDC-W6641U/ KDC-W6541U/ KDC-W6141U/ KDC-W6041U