Kenwood KDC-W7531 Audio file source, Messages shown below display your systems condition

Models: KDC-W8531 KDC-W7031 KDC-W7531

1 56
Download 56 pages 45.13 Kb
Page 54
Image 54

Troubleshooting Guide

Audio file source

?Cannot play an Audio file.

The media is scratched or dirty.

Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7).

?The sound skips when an Audio file is being played.

The media is scratched or dirty.

Clean the media, referring to the CD cleaning of the section on <About CDs> (page 7).

The recording condition is bad.

Record the media again or use another media.

?The Audio file track time isn’t displayed correctly.

---

There are times when it isn’t displayed correctly according to the Audio file recording conditions.

The messages shown below display your systems condition.

Eject:

No disc magazine has been loaded in

 

the changer. The disc magazine is not

 

completely loaded.

 

Load the disc magazine properly.

 

No CD in the unit.

 

Insert the CD.

No Disc:

No disc has been loaded in the disc

 

magazine.

 

Load a disc into the disc magazine.

TOC Error:

No disc has been loaded in the disc

 

magazine.

 

Load a disc into the disc magazine.

 

The CD is quite dirty. The CD is upside-

 

down. The CD is scratched a lot.

 

Clean the CD and load it correctly.

Error 05:

The CD is upside-down.

 

Load the CD correctly.

Blank Disc:

Nothing has been recorded on the MD.

No Track:

No tracks are recorded on the MD,

 

although it has a title.

Error 15:

Media was played that doesn’t have data

 

recorded that the unit can play.

 

Use media that has data recorded that

 

the unit can play.

No Panel:

The faceplate of the slave unit being

 

connected to this unit has been removed.

 

Replace it.

Error 77: The unit is malfunctioning for some reason.

Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center.

Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason.

Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center.

54 English

Page 54
Image 54
Kenwood KDC-W7531 Audio file source, Messages shown below display your systems condition, ? Cannot play an Audio file