Allied Telesis AR400 manual X Configure switch, Page 62 AlliedWare OS How To Note IGMP

IGMP fast leave > Example

XConfigure switch 1

Switch 1 is an IGMP Querier.

set system name="Switch 1"

#STP general configuration enable stp=default

set stp=default mode=rapid

set stp=default port=1 edgeport=yes

#VLAN general configuration

create vlan=vlan100 vid=100 add vlan=100 port=1-52

#IP configuration enable ip

add ip int=vlan100 ip=172.31.0.254 mask=255.255.255.0 enable ip igmp

enable ip igmp int=vlan100

XConfigure switch 2

Switch 2 is an IGMP Snooper. IGMP snooping is enabled by default and does not need any configuration.

set system name="Switch 2"

#STP general configuration enable stp=default

set stp=default mode=rapid set stp port=2 edgeport=yes

#VLAN general configuration create vlan=vlan100 vid=100 add vlan=100 port=1-26

XConfigure switch 3

Switch 3 is also an IGMP Snooper. Fast leave is enabled on this switch.

set system name="Switch 3"

#STP general configuration enable stp=default

set stp=default mode=rapid set stp port=3 edgeport=yes

#VLAN general configuration create vlan=vlan100 vid=100 add vlan=100 port=1-26

#IP configuration

set igmpsnooping vlan=vlan100 fastleave=on

Page 62 AlliedWare™ OS How To Note: IGMP