Allied Telesis AR400 manual X Configure switch, Switch 2 is an IGMP Snooper

Static IGMP > Example

XConfigure switch 1

Switch 1 is an IGMP Querier and has the static IGMP entry. Static IGMP also requires you to:

zadd an IP address to the interface to which you will attach the static entry

zenable IGMP

zenable the interface as an IGMP interface

set system name="Switch 1"

#STP general configuration enable stp=default

set stp=default mode=rapid

set stp=default port=1 edgeport=yes set stp=default port=5 edgeport=yes

#VLAN general configuration

create vlan=vlan100 vid=100 add vlan=100 port=1-52

#IP configuration enable ip

add ip int=vlan100 ip=172.31.0.254 mask=255.255.255.0 enable ip igmp

enable ip igmp int=vlan100

create ip igmp destination=224.12.13.14 int=vlan100 port=5

XConfigure switch 2

Switch 2 is an IGMP Snooper.

set system name="Switch 2"

#STP general configuration enable stp=default

set stp=default mode=rapid set stp port=2 edgeport=yes

#VLAN general configuration create vlan=vlan100 vid=100 add vlan=100 port=1-26

Page 49 AlliedWare™ OS How To Note: IGMP