Allied Telesis AR400 manual Configure switch, AlliedWare OS How To Note Igmp

IGMP throttling (limiting the number of streams for each subscriber) > Example

XConfigure switch 1

Switch 1 is an IGMP Querier. Note that it has a filter configured on it, which is from the previous example.

set system name="Switch 1"

#STP general configuration enable stp=default

set stp=default mode=rapid

set stp=default port=1 edgeport=yes

#VLAN general configuration

create vlan=vlan100 vid=100 add vlan=100 port=1-52

# Switching configuration

set switch port=1 igmpfilter=1

#IP configuration enable ip

add ip int=vlan100 ip=172.31.0.254 mask=255.255.255.0 enable ip igmp

enable ip igmp int=vlan100 create igmp filter=1

add igmp filter=1 entry=1 group=224.0.1.22 action=exclude add igmp filter=1 entry=2 group=224.0.0.0-224.255.255.255

XConfigure switch 2

Switch 2 is an IGMP Snooper. IGMP snooping is enabled by default and does not need any configuration. Switch 2 is limited to six multicast groups on port 2.

set system name="Switch 2"

#STP general configuration enable stp=default

set stp=default mode=rapid set stp port=2 edgeport=yes

#VLAN general configuration create vlan=vlan100 vid=100 add vlan=100 port=1-26

#Switching configuration

set switch port=2 igmpmaxgroup=6 igmpaction=replace

Page 41 AlliedWare™ OS How To Note: IGMP