4
GETTING STARTED
Cancel the demonstration
When you turn on the power (or after you reset the unit), the display
shows: “CANCEL DEMO” \ “PRESS” \ “VOLUME KNOB”
1 Press the volume knob.
[YES]
is selected for the initial setup.
2 Press the volume knob again.
“DEMO OFF” appears.
Set the clock
1 Press the volume knob to enter
[FUNCTION]
.
2 Turn the volume knob to select
[SETTINGS]
, then press the knob.
3 Turn the volume knob to select
[CLOCK]
, then press the knob.
4 Turn the volume knob to select
[CLOCK ADJUST]
/
[CLOCK ADJ]
, then
press the knob.
5 Turn the volume knob to adjust the hour, then press the knob.
6 Turn the volume knob to adjust the minute, then press the knob.
Press 4
/
¢ to move between the hour and minute adjustment.
7 Press and hold to exit.
(or)
Press and hold SCRL DISP to enter clock adjustment mode
directly while in clock display screen.
Then, perform steps 5 and 6 above to set the clock.
1
2
Set the initial settings
1 Press SRC to enter
[STANDBY]
.
2 Press the volume knob to enter
[FUNCTION]
.
3 Turn the volume knob to select
[INITIAL SET]
, then press the knob.
4 Turn the volume knob to make a selection (see the following table), then
press the knob.
5 Press and hold to exit.
• To return to the previous hierarchy, press .
Default:
XX
PRESET TYPE NORMAL/ NORM: Memorizes one station for each preset button in each band (FM1/
FM2/ FM3/ AM). ; MIX: Memorizes one station for each preset button regardless of the
selected band.
KEY BEEP ON: Activates the keypress tone. ; OFF: Deactivates.
PANDORA SRC ON: Enables PANDORA in source selection. ; OFF: Disables. (
➜
8)
BUILT-IN AUX/
BUILTIN AUX ON: Enables AUX in source selection. ; OFF: Disables. (
➜
6)
CD READ 1: Automatically distinguishes between audio file disc and music CD. ; 2: Forces to play
as a music CD. No sound can be heard if an audio file disc is played.
SP SELECT OFF/ 5/4/ 6 × 9/6/ OEM: Selects according to the speaker size (5 inches or
4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum performance.
F/W UPDATE
F/W UP xx.xx YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated).
For details on how to update the firmware, see: www.kenwood.com/cs/ce/
3
EN_KDC-X497[KW]_f.indd 4EN_KDC-X497[KW]_f.indd 4 10/10/12 3:59:58 PM10/10/12 3:59:58 PM